manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 223

Button

Usage

TRANSFER

Used to transfer a call to another party.

Flexible CO (Trunk)

Used to make or receive a trunk call or can be
reassigned to a different Trunk Access button (Default:
S-CO) or to another feature button.

INTERCOM

Used to make or receive intercom calls.

AUTO ANS (Auto
Answer)/MUTE

Used to receive an incoming call in hands-free mode,
or used for microphone or handset mute during a
conversation. (Dual feature button)

AUTO DIAL/STORE

Used for System/Personal Speed Dialling and storing
programme changes.

CONF (Conference)

Used to establish a multiple-party conversation.

FWD/DND

Used to perform FWD or DND. (Dual feature button)

PAUSE

Used to insert a pause in a stored number.

Soft

Used to select the item displayed on the bottom line of
the display.

[DSS Console]

Button

Usage

Flexible DSS (Direct Station Selection)

Used to access an extension with one touch. Every
button is programmed to correspond to an extension.
DSS buttons can also be reassigned to other features.

Conditions

•

Certain buttons are equipped with a light to show line or feature status.

Feature Guide

223

1.20.1 Fixed Buttons

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands