manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 269

Time mode (day/lunch/break/night) of the preprogrammed tenant is applied to the DID destination and
company greeting number.

PBX

Tenant 1

123-4567

(Company A)

Tenant 3

(Company B)

Trunk Call

Extn. 105

Extn. 102

VPS

(Floating Extn. No. 500)

Intercept

123-2468

Trunk Call

Sends the following information:
 

· 

VM Trunk Group:  1

 · 

Time mode: Day

Sends the following information:
 

· 

VM Trunk Group:  2

 · 

Time mode: Night

8.

Caller’s Identification Notification to the VPS

When receiving a trunk call, the PBX sends the caller’s identification number/name to the VPS.

9.

DID Number Notification to the VPS

When receiving a trunk call with a DDI/DID number or an MSN, the PBX sends the DDI/DID number or
MSN to the VPS. The number will be sent to the VPS even if the call reaches the VPS after redirection by,
for example, the Intercept Routing feature.

10.

Status Notification to the VPS

After the call is redirected by the VPS, the PBX sends the status of the redirected extension (e.g., busy)
to the VPS.

11.

Paging by the VPS

The VPS can perform the Paging feature using the recorded message. (

®

 1.15.1  Paging)

12.

Live Call Screening (LCS)

A PT or PS user can monitor his own mailbox while a caller is leaving a message and, if desired, answer
the call by pressing the LCS button. When the caller is leaving a message in the mailbox, monitoring can
be carried out in two ways: each PT user can choose which through personal programming (Live Call
Screening Mode Set). PS users cannot choose the way: only Private mode is available for them.

Hands-free mode:

 The user can monitor the call automatically through the built-in speaker.

Private mode:

 The user will hear a warning tone. To monitor the call, the user goes off-hook with the

handset or SP-PHONE button. However, PS users cannot monitor the call with the speakerphone.

®

 6.1  [4-1-1] Wired Extension—Extension Settings—Option 4—

LCS Answer Mode

13.

Two-way Recording into the VPS

A PT user can record a conversation into his own mailbox or another mailbox, while talking on the phone.
The Two-way Record button is used to record into one’s own mailbox. The Two-way Transfer button is
used to record into someone else’s mailbox.

Feature Guide

269

1.24.3 Voice Mail DPT (Digital) Integration

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands