manualshive.com logo in svg

Panasonic KX-TDA100D, Features Manual

Share
Download
Panasonic KX-TDA100D Features Manual Download Page 362

the call is received, depending on the CTI software used. In Third Party Call Control, the PC does not
control extensions directly.

PBX

CTI 

Interface

CTI Server

PC

PC

LAN

LAN or USB

Conditions

[General]

•

Capable telephone:

DPT: KX-DT300 series or KX-T7600 series PT, USB module
IP-PT

•

CTI application software must be installed on the connected PC. In addition, some features may require a
KX-TDA0920 SD Memory Card for Software Upgrade to Enhanced Version.

•

Application Programming Interface (API)/Protocol

The following interfaces are required for First Party Call Control and Third Party Call Control:

Type

API/Protocol

First Party Call Control

•

TAPI 2.1

Third Party Call Control

•

ECMA CSTA Phase 3

•

TAPI 2.1

•

The operating system of PC or CTI Server required for First Party Call Control or Third Party Call Control
depends on your CTI application software. For details, refer to the manual for your CTI application software.

•

Third Party Call Control cannot be performed when two or more CTI servers are connected to the PBX.

[IP-PT Call Control]

•

A PC connected directly to an IP-PT cannot be used for First Party Call Control.

•

IP-PTs do not support the use of PC Phone or PC Console software on a connected PC.

Installation Manual References

2.3.1  DMPR Card
2.6.8  CTI-LINK Card (KX-TDA0410)
2.7.3  First Party Call Control CTI Connection
2.9.1  Connection of Peripherals

362

Feature Guide

1.32.1 Computer Telephony Integration (CTI)

Summary of Contents for KX-TDA100D









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands