Panasonic KX-TD816AL User Manual Download

Page: 278 / 328

5-70

SLT Features

5.2

SLT Features

Trunk (CO Line) Answer From Any Station (TAFAS)

Allows you to answer an incoming CO call, paged through an external pager, from any
extension.

While hearing a tone from the external pager;

1. Lift the handset.

2. Dial the feature number (42).

3. Dial the external pager number as follows:

– 1

: if you are connected to the KX-TD816

– 1 through 4 : if you are connected to the KX-TD1232

• You hear confirmation tone (optional).

• The line is connected and you can start talking.

Conditions

• This feature can be used in the following cases:

a) The floating number

of an external pager is assigned as the DIL 1:1 destination.

In this case, all incoming calls on the specified line are signaled.

b) The floating number

of an external pager is assigned as the Intercept Routing

destination. In this case, incoming calls re-directed to the destination, are signaled.

• Confirmation tone is audible before you are connected to the caller. Eliminating the tone is

programmable.

Programming References

• System Programming — Installation Manual

[407]–[408] DIL 1:1 Extension — Day/Night

[409]–[410] Intercept Extension — Day/Night

[813] Floating Number Assignment

[990] System Additional Information, Field (16)

Feature References

Floating Station (

→

see Installation Manual)

Floating Number (FN) is a virtual extension number for resources to make it appear to be an extension. Refer to

the Installation Manual

external pager number

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands