Panasonic KX-TD816AL User Manual Download Page 85

Page: 85 / 328

DPT Features

3-19

3.2

DPT Features

• Setting a new "Call Forwarding" function (All Calls, Busy, Busy/No Answer, etc.) cancels

any other "Call Forwarding" functions and the "Do Not Disturb (DND)" feature that has
been set.

• A floating extension such as MODEM or external pager cannot be programmed as a

forwarding destination.

• Two extensions can set each other as the destination extension. In this case, the intercom

call to the other party while he/she is absent will not be forwarded back to the original
extension.

• Confirmation tone 2 (two beeps) is sent when the previously programmed data is the same

as the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to "Tone List" in
the Appendix (Section 7).

• A flexible button on the KX-T7250 (no FWD/DND button provided) can be assigned as the

FWD/DND button.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — FWD/DND Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

Feature References

Call Forwarding — CANCEL
Do Not Disturb (DND)
EXtra Device Port (XDP) (

→

see Installation Manual)

Voice Mail Integration

Call Forwarding — All Calls

You can re-direct all of your calls to another extension.

Display Operation (— for KX-T7235)

Setting

1. Lift the handset or press the SP-PHONE button.

2. Press the FWD/DND button.

FWD/DND

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands