Panasonic KX-TD816AL User Manual Download

Page: 307 / 328

Quick Reference

Quick Reference

6-27

❒

Pulse to Tone Conversion

• Dial the phone number (Pulse mode).
• Dial

+ #.

• Dial the phone number (Tone mode).

❒

Redial

— Last Number

• Off-hook.
• Dial #.

❒

Station Feature Clear

• Off-hook.
• Dial 790.
— Confirmation tone is audible.
• On-hook.

❒

Station Speed Dialing

Storing the phone number

• Off-hook.
• Dial 60 + station speed dial number (0 through

9) + phone #.

— Confirmation tone is audible.
• On-hook.

Dialing

• Off-hook.
• Dial 6

+ station speed dial number.

❒

System Speed Dialing

• Off-hook.
• Dial

+ system speed dial number (000

through 499).

❒

Timed Reminder

Setting

• Off-hook.
• Dial 761.
• Enter hour (01 through 12).
• Enter minute (00 through 59).
• Dial 0 or 1.

- 0 : for AM
- 1 : for PM

• Dial 0 or 1.

- 0 : for a one time setting
- 1 : for a daily setting

• On-hook.

Cancelling

•Off-hook.
•Dial 760.
— Confirmation tone is audible.
• On-hook.

❒

Trunk (CO Line) Answer From Any
Station (TAFAS)

• Off-hook.
• Dial 42.
• Dial external pager number as follows:
– 1

: if connected to the KX-TD816

– 1 through 4 : if connected to the KX-TD1232

❒

Voice Mail Integration

Setting Call Forwarding destination to Voice
Mail

• Off-hook.
• Dial 710 + Call Forwarding number (2 through

5).
- 2 : Call Forwarding – All calls
- 3 : Call Forwarding – Busy
- 4 : Call Forwarding – No Answer
- 5 : Call Forwarding – Busy/No Answer

• Dial the extension number of the Voice Mail.
— Confirmation tone is audible.
• On-hook.

Listening to a stored message

• Off-hook.
• Dial the extension number of the Voice Mail.

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands