Panasonic KX-TD816AL User Manual Download Page 99

Page: 99 / 328

DPT Features

3-33

3.2

DPT Features

Call Hold Retrieve

Allows you to retrieve a call that has been placed on hold by another
extension.

Retrieving a CO call on hold

— at another extension;

1. Press the CO button whose indicator is flashing red slowly.

• The CO indicator light turns steady green.

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (53).

3. Dial the held CO line number (01 through 24).

• You hear confirmation tone (optional).

Retrieving an intercom call on hold

— at another extension;

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (51).

3. Dial the holding extension number.

• You hear confirmation tone (optional).

Conditions

• Confirmation tone is audible when the call is retrieved by the feature number. Eliminating

the tone is programmable.

TD816 TD1232

✔

DPT (72**)

✔

held CO line number

holding extension number

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Panasonic KX-TD816AL, User Manual, Page: 99 / 328

Search results

Summary of Contents for KX-TD816AL

Reviews: