A
3.2
DPT Features
3-10
DPT Features
Conditions
In "Verified - All Calls" mode
• You must always enter a pre-assigned account code when making any of the following calls
unless it has previously been stored in memory:
a) Call Forwarding — to CO Line
b) Manual Dialing (Selecting a CO line)
c) One-Touch Dialing
d) Pickup Dialing (Hot Line)
e) Redial, Last Number
f) Redial, Saved Number
g) Station Speed Dialing
h) System Speed Dialing
In "Verified - Toll Restriction Override" mode
• You can enter a pre-assigned account code only when you need to override toll restriction
(Toll Restriction Override by Account Code Entry).
In "Option" mode
• You can enter any account code when needed. It is possible to record a calling or called
party's account code in the SMDR within fifteen seconds after the other party hangs up.
General
• There is no need for an account code entry when receiving incoming calls.
• Dialing "
" while entering an account code allows you to clear the number and re-enter.
• Pressing the flexible button assigned as the Account button while entering an account code
cancels the entry.
• An account code can be up to five numeric digits (0 through 9). RECALL, PAUSE, etc.
are not allowed. After entering an account code, the delimiter "#" or "99" must be entered.
• An account code can be stored into Memory Dialing ("One-Touch Dialing," "Pickup
Dialing (Hot Line)," "System/Station Speed Dialing," "Call Forwarding — to CO Line").
The sequence to enter an account code into Memory Dialing is as follows:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
or
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
• If an entered account code does not match a stored account code,
1) When making a CO call, reorder tone is returned.
2) While having a conversation, the code entry is accepted and the call is maintained
(= Option mode).
3) After a CPC signal
*
3
has been detected, the code entry is accepted (= Option mode).
With
Compliments
Absolute
Phone
&
Data
