Panasonic KX-TD816AL Page 220 User Manual Download

Page: 220 / 328

5-12

SLT Features

5.2

SLT Features

Busy Station Signaling (BSS)

The busy extension that you called hears three beeps and knows that you are waiting.

If you make an intercom call and hear busy tone;

1. Dial 2.

• Wait for an answer and talk.

Conditions

• To answer the signal from the calling extension, refer to "Call Waiting" in this manual.

• This feature is only available to those extensions that have the "Call Waiting" feature

assigned.

• If the called party is provided with "Off-Hook Call Announcement (OHCA)" function, the

caller can announce through the speaker.

Feature References

Call Waiting
Off-Hook Call Announcement (OHCA)

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands