Panasonic KX-TD816AL Page 121 User Manual Download

Page: 121 / 328

DPT Features

3-55

3.2

DPT Features

To put both parties on hold

1. Press the HOLD button.

• This feature is available only when at least one party is on a CO

line.

Conditions

• Up to six conference calls are allowed simultaneously.

• You can return to the original party before the third party answers by pressing the

TRANSFER button.

• Pressing a CO button which is not in the conference, allows you to exit from the conference

leaving the two parties connected unless they are both CO lines. If the other parties are
both CO lines, they will be disconnected.

• A flexible button on the KX-T7250 (no CONF button provided) can be assigned as the

CONF button.

• When a two-party call is changed to a three-party call and vice versa, a confirmation tone is

sent to all three parties. Eliminating the tone is programmable.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — Conference (CONF) Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

• System Programming — Installation Manual

[990] System Additional Information, Field (13)

HOLD

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands