Panasonic KX-TD816AL User Manual Download

Page: 134 / 328

3-68

DPT Features

Full One-Touch Dialing

The handsfree speakerphone is automatically activated. You can enter a
phone number or access a system feature with the touch of a button.

1. Press the flexible button assigned as the One-

Touch Dialing, DSS, REDIAL, or SAVE button.

• The SP-PHONE indicator light turns red.

• The CO or INTERCOM indicator light turns green.

Conditions

• DSS buttons on a DSS Console can also activate this feature.

• This feature must be initially assigned through Station Programming.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — DSS Button, One-Touch Dialing Button, SAVE Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

Full One-Touch Dialing Assignment

Feature References

One-Touch Dialing
Redial, Last Number
Redial, Saved Number

TD816 TD1232

✔

DPT (72**)

✔

3.2

DPT Features

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands