Panasonic KX-TD816AL User Manual Download

Page: 214 / 328

5-6

SLT Features

5.2

SLT Features

4. Hang up.

Message 5. "Out until %% / %%" (month/day)

1. Lift the handset.

2. Dial the feature number (750) and 5.

3. Enter the month (01 through 12) and the day (01 through 31).

• You hear confirmation tone and then dial tone.

4. Hang up.

Message 6. "In a Meeting"

1. Lift the handset.

2. Dial the feature number (750) and 6.

• You hear confirmation tone and then dial tone.

3. Hang up.

Message 7, 8, and 9. (Programmable)

1. Lift the handset.

month and day

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands