DPT Features
3-41
3.2
DPT Features
C
Call Transfer — to CO Line
Allows you to transfer your call to a CO line by a Screened Call Transfer.
Screened Call Transfer
While having a conversation;
1. Press the TRANSFER button.
• The other party is placed on hold.
• You hear confirmation tone and then dial tone.
2. Press a CO button or dial the line access code (9 or 81 through 88).
3. Dial the phone number where calls will be transferred.
4. Wait for an answer and announce.
5. Hang up or press the SP-PHONE button.
• The call is transferred.
Conditions
• Pressing the FLASH button while dialing clears the display; you can enter the revised number.
• If you want to return to the held call, press the TRANSFER button or corresponding CO or
INTERCOM button before the destination party answers.
• Execution of this feature is determined by the "Class of Service" assigned to the extension.
• If a call between two external parties is established, the alarm tone is sent to both parties fifteen
seconds before the assigned duration time limit (default: 10 min.). "Hold Recall" is generated to
the transferring extension fifty seconds before the time out.
• If you want to join the conversation after transferring the call or while hold recall tone is sent,
press the corresponding CO button. A conference call is established.
Programming References
• System Programming — Installation Manual
[206] CO-to-CO Call Duration Time
[503] Call Transfer to CO Line
[601] Class of Service
Feature References
Hold Recall (
→
see Installation Manual)
TD816 TD1232
✔
✔
DPT (72**)
20
30
35
50
✔
✔
✔
✔
1
TRANSFER
2
CO
3
phone number
4
5
With
Compliments
Absolute
Phone
&
Data
