Panasonic KX-TD816AL Page 270 User Manual Download

Page: 270 / 328

5-62

SLT Features

5.2

SLT Features

Pulse to Tone Conversion

Allows you to change from Pulse to Tone dialing mode so that you can access special
services such as computer-accessed long distance.

1. Dial the phone number (Pulse mode).

2. Dial

and #.

3. Dial the phone number (Tone mode).

Conditions

• You cannot change from Tone to Pulse dialing mode.

Redial, Last Number

Allows you to automatically re-enter the last CO call number.

1. Lift the handset.

2. Dial #.

Conditions

• Up to twenty-four digits can be stored and redialed; this does not include the CO line access

code.

• "

" and "#" are counted as one digit.

• The memorized telephone number is replaced by a new one if at least one digit to be sent to

a CO line is dialed. Dialing a CO line access code alone does not change the memorized
number.

phone number

4.2

SLT Features

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands