Panasonic KX-TD816AL Page 222 User Manual Download

Page: 222 / 328

5-14

SLT Features

5.2

SLT Features

• Two extensions can set each other as the destination extension. In this case, the intercom

call to the other party while he/she is absent will not be forwarded back to the original
extension.

• Confirmation tone 2 (two beeps) is sent when the previously programmed data is the same

as the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to "Tone List" in
the Appendix (Section 7).

Feature References

Call Forwarding — CANCEL
Do Not Disturb (DND)
EXtra Device Port (XDP) (

→

see Installation Manual)

Voice Mail Integration

Call Forwarding — All Calls

You can re-direct all of your calls to another extension.

Setting

1. Lift the handset.

2. Dial the feature number (710) and 2.

3. Dial the extension number to which you wish to forward the call.

• You hear confirmation tone and then dial tone.

4. Hang up.

extension number

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands