Panasonic KX-TD816AL User Manual Download Page 42

Page: 42 / 328

2.2

Programming

2-10

Station Programming

Total Extension Charge Fee Reference

Provides you with the display of the total extension charge (telephone rate). You can refer
the displayed meter and charge.

— Be sure that you are in Station Programming mode : Press [PROGRAM] [9] [9].

1. Dial 8.

2. Enter the ID code (4 digits).

• The display shows:

Charge Meter

• To erase an incorrect entry, press the CLR (S2) button.

3. Dial 3.

• The display shows the total extension meter.

Sum:00450

SEL

4. Press the SEL (S1) button.

• The display shows the total extension charge.

Sum:$00045.0

SEL

5. Press the REDIAL (PREV) or HOLD (END) button.

— REDIAL (PREV) button : To return to step 3.

— HOLD (END) button : To return to the initial programming mode.

— To exit from Station Programming mode : Press [PROGRAM] or lift the handset.

ID code

HOLD

SEL

REDIAL

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands