Panasonic KX-TD816AL User Manual Download

Page: 228 / 328

5-20

SLT Features

5.2

SLT Features

Call Hold

Allows you to place an intercom or a CO call on hold.

To place a call on hold

While having a conversation;

1. Press the Register Recall button.

2. Dial the feature number (50).

• You hear confirmation tone and then dial tone.

• You may replace the handset.

Retrieving a call on hold

– at the holding extension;

1. Lift the handset.

2. Dial the feature number (50).

Conditions

• To retrieve a call on hold at another extension, refer to "Call Hold Retrieve" in this manual.

• If a held call is not retrieved within the specific period of time (default: 60 sec.), "Hold

Recall" occurs.

• If a CO call is placed on hold and not retrieved in thirty minutes, it is automatically

disconnected.

• Either one CO or intercom call can be placed on hold at the same time.

Programming References

• System Programming — Installation Manual

[200] Hold Recall Time

Feature References

Call Hold Retrieve
Hold Recall (

→

see Installation Manual)

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands