Panasonic KX-TD816AL User Manual Download Page 306

Page: 306 / 328

Quick Reference

6-26

Quick Reference

❒

Outward Dialing

— Line Access, Automatic

• Off-hook.
• Dial 9 + phone number.

— Line Access, CO Line Group

• Off-hook.
• Dial 8 + CO line group number (1 through 8).
• Dial the phone number.

❒

Paging

— All

• Off-hook.
• Dial 62 (or 63) +

— Confirmation tone is audible (optional).
• Announce.

— External

To access all external pagers

• Off-hook.
• Dial 620.
— Confirmation tone is audible (optional).
• Announce.

To access a particular pager only

• Off-hook.
• Dial 62.
• Dial external pager number as follows:
– 1

: if connected to the KX-TD816

– 1 through 4 : if connected to the KX-TD1232
— Confirmation tone is audible (optional).
• Announce.

— Group

To access all groups simultaneously

• Off-hook.
• Dial 6300.
— Confirmation tone is audible (optional).
• Announce

To access a particular group of extensions

• Off-hook.
• Dial 63 + extension group number (01 through

16).

— Confirmation tone is audible (optional).
• Announce.

❒

Paging – ANSWER

• Off-hook.
• Dial 42 + external pager number, or 43.

- 42 : To answer a page sent to the external

pager/TAFAS

- 43 : To answer a page sent to the built-in

speaker

❒

Paging and Transfer

To transfer

• Press Register Recall button before dialing the

paging feature number (62 or 63).

— Check the feature number you wish to use in

the "Paging" section.

❒

Pickup Dialing

(Hot Line)

Programming the phone number

• Off-hook.
• Dial 742 + phone #.
— Confirmation tone is audible.
• On-hook.

Setting / Cancelling

• Off-hook.
• Dial 74.
• Dial 1 or 0.

- 1 : for setting
- 0 : for cancelling

— Confirmation tone is audible.
• On-hook.

Dialing

• Off-hook.

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands