Panasonic KX-TD816AL User Manual Download

Page: 177 / 328

DPT Features

3-111

3.2

DPT Features

Voice Mail Integration

Allows you to have your calls forwarded to your Voice Processing System
mailbox.

Setting Call Forwarding destination to Voice Mail

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Press the FWD/DND button.

• You may dial the feature number (710) or press the flexible

button assigned as the FWD/DND button instead.

3. Dial the Call Forwarding number (2 through 5).

• Each Call Forwarding number corresponds to the following

services:

-2: Call Forwarding — All Calls

-3: Call Forwarding — Busy

-4: Call Forwarding — No Answer

-5: Call Forwarding — Busy/No Answer

4. Dial the extension number of the Voice Mail.

• You hear confirmation tone and then dial tone.

5. Hang up or press the SP-PHONE/MONITOR button.

• Calls directed to you are automatically forwarded to your

mailbox.

• Callers can leave their messages in the mailbox, according to the

Voice Mail guidance.

Listening to a stored message

You can listen to the messages stored in your mailbox with ease. There are two operations to
play back messages.

Using the Message Waiting (MESSAGE) button

If there is a message in the mailbox, the MESSAGE indicator light is on.

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Press the MESSAGE button or the flexible button assigned as the

MESSAGE button.

• You can listen to the stored message without any other

operation.

FWD/DND

VM extension number

FWD number

MESSAGE

TD816 TD1232

✔

DPT (72**)

✔

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands