Panasonic KX-TD816AL User Manual Download

Page: 141 / 328

DPT Features

3-75

Conditions

• The system supports a maximum of 128 simultaneous messages. In trying to send the

129th message, you hear reorder tone.

• A flexible button on the KX-T7250 (no MESSAGE button provided) can be assigned as the

MESSAGE button.

• If the MESSAGE button is not provided nor assigned, dial tone 4

after going off-hook

informs you of a message waiting.

• When multiple messages are left at your extension, call back is initiated in the order the

message were left.

• If you select a specific message to call back, call back is executed sequentially from the

selected message on.

• With the KX-T7235, you can set or cancel this feature with the display operation.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — Message Waiting (MESSAGE) Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

Feature References

System Feature Access Menu — Message Waiting (3.4/Special Display Features)

One of the dial tone. Refer to "Tone List" in the Appendix (Section 7).

Microphone Mute

Allows you to turn off the speaker microphone so that you can consult
privately with others in the room.

Setting

While having a conversation in handsfree mode;

1. Press the AUTO ANSWER/MUTE button.

• The AUTO ANSWER/MUTE indicator light flashes red slowly.

Cancelling

When microphone mute is established;

1. Press the AUTO ANSWER/MUTE button.

• The AUTO ANSWER/MUTE indicator light turns off.

Conditions

• This feature is only available during handsfree conversation.

TD816 TD1232

✔

DPT (72**)

✔

AUTO ANSWER

MUTE

AUTO ANSWER

MUTE

3.2

DPT Features

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands