Panasonic KX-TD816AL User Manual Download Page 173

Page: 173 / 328

DPT Features

3-107

3.2

DPT Features

Checking the setting time (with a display PT only)

1. Lift the handset or press the SP-PHONE button.

2. Dial the feature number (76) and 2.

If "10:10 AM" has been set, the display shows:

Alarm 10:10AM

— only one time

Alarm 10:10AM

— every day

3. Hang up or press the SP-PHONE button.

Stopping the alarm ringing

1. Lift the handset.

• Pressing any key also stops the alarm ringing.

Conditions

• The system clock must be set before the alarm is set.

• The alarm ringing continues for thirty seconds.

• If an alarm time has not been set, the display shows the following:

Alarm Not Stored

• If you receive an incoming call during the alarm, ringing starts after the alarm stops.

• If you are having a conversation at the time the alarm is set to sound, the alarm starts after

the conversation.

Programming References

• System Programming — Installation Manual

[000] Date and Time Set

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Brands by name

Popular brands