Panasonic KX-TD816AL User Manual Download

Page: 164 / 328

3-98

DPT Features

3.2

DPT Features

Redial, Automatic

Allows you to access the last dialed or saved number while in handsfree
mode.

1. Press the SP-PHONE button.

2. Press the REDIAL button.

Conditions

• The default setting for redialing is four redials initiated at two minutes intervals. The

setting is changed through System Programming.

• If there is an incoming call during redialing, the redialing process is delayed until the call

termination of the incoming call.

• If any other action is performed or any other operation is initiated during Automatic Redial,

this function is cancelled.

Programming References

• System Programming — Installation Manual

[209] Automatic Redial Repeat Times

[210] Automatic Redial Interval Time

Feature References

Redial, Last Number
Redial, Saved Number

TD816 TD1232

✔

DPT (72**)

✔

SP-PHONE

REDIAL

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands