manualshive.com logo in svg

Panasonic KX-TD816AL, User Manual

Share
Download
Panasonic KX-TD816AL User Manual Download Page 108

3-42

     DPT Features

C

3.2

DPT Features

Call Transfer — to Extension

Allows you to perform a Screened or Unscreened Call Transfer to another
extension.  A call can also be transferred to an extension by using the DSS
button, if it is programmed.

Screened Call Transfer

While having a conversation;

1. Press the TRANSFER button.

• The other party is placed on hold.

• You hear confirmation tone and then dial tone.

2. Dial the extension number where the call will be transferred.

• You hear ringback tone.

3. Wait for an answer and announce.

4. Hang up or press the SP-PHONE button.

• The call is transferred.

Unscreened Call Transfer

While having a conversation;

1. Press the TRANSFER button.

• The other party is placed on hold.

• You hear confirmation tone and then dial tone.

2. Dial the extension number where the call will be transferred.

• You hear ringback tone.

• Ringing starts at the destination extension.

3. Hang up or press the SP-PHONE button.

1

TRANSFER

2

extension number

3

1

TRANSFER

2

extension number

3

4

 TD816     TD1232

✔

 

✔

DPT (72**)

20

30

35

50

✔

✔

✔

✔

With 

Compliments 

Absolute 

Phone 

& 

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands