Panasonic KX-TD816AL User Manual Download

Page: 45 / 328

2.2

Programming

Station Programming

2-13

ID code

All Clear

Allows you to clear all recorded charge for CO line and account code, or extension, and set
the new starting time for recording.

— Be sure that you are in Station Programming mode : Press [PROGRAM] [9] [9].

To clear all CO line and all account code charge

1. Dial 8.

2. Enter the ID code (4 digits).

• The display shows:

Charge Meter

• To erase an incorrect entry, press the CLR (S2) button.

3. Dial 6.

• The display shows:

Meter Sum Clear?

CLR NEXT

4. Press the CLR (S2) button.

• The display shows Date and Time of the last clearing.

5. Press the STORE button.

• Recorded charge will be all cleared and the present time will be

displayed.

6. Press the REDIAL (PREV) or HOLD (END) button.

— REDIAL (PREV) button : To return to step 4.

— HOLD (END) button : To return to the initial programming mode.

To clear all extension charge

1. Dial 8.

2. Enter the ID code (4 digits).

• The display shows:

Charge Meter

• To erase an incorrect entry, press the CLR (S2) button.

ID code

AUTO DIAL

STORE

CLR

HOLD

REDIAL

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands