manualshive.com logo in svg

Panasonic KX-TD816AL, User Manual

Share
Download
Panasonic KX-TD816AL User Manual Download Page 260

5-52

     SLT Features

P

5.2

SLT Features

4. Wait for an answer and talk.

To access a particular pager only

1. Lift the handset.

2. Dial the feature number (62).

3. To select the external pager you wish to use, dial as follows:

–           1

: if you are connected to the KX-TD816

–  1 through 4 : if you are connected to the KX-TD1232

• You hear confirmation tone (optional).

4. Make the announcement.

5. Wait for an answer and talk.

Conditions

• If the designated pager is being used, busy tone is heard.

• The paging priorities are as follows:

(1) TAFAS (Trunk (CO Line) Answer From Any Station)

(2) Paging — External

(3) Background Music (BGM) — External

If a higher priority page is requested when a lower priority page is active, the higher
priority overrides the lower priority.

Feature References

Background Music (BGM) — External (3.3/Operator Service Features)
Trunk (CO Line) Answer From Any Station (TAFAS)

4

1

2

3

external pager number

4

5

With 

Compliments 

Absolute 

Phone 

& 

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands