Panasonic KX-TD816AL User Manual Download

Page: 125 / 328

DPT Features

3-59

3.2

DPT Features

FWD/DND

Do Not Disturb

FWD/DND

FWD/DND Cancel

Do Not Disturb (DND)

Allows you to prevent other parties from disturbing you. Your extension
does not receive intercom or CO calls.

Display Operation (— for KX-T7235)

Setting

1. Lift the handset or press the SP-PHONE button.

2. Press the FWD/DND button.

3. Press the Do Not Disturb (F2) button.

• You hear confirmation tone and then dial tone.

• The display shows:

Do Not Disturb

• The FWD/DND indicator light turns on.

4. Hang up or press the SP-PHONE button.

Cancelling

1. Lift the handset or press the SP-PHONE button.

2. Press the FWD/DND button.

3. Press the FWD/DND Cancel (F1) button.

• You hear confirmation tone and then dial tone.

• The display shows:

FWD/DND Cancel

• The FWD/DND indicator light turns off.

4. Hang up or press the SP-PHONE button.

TD816 TD1232

✔

DPT (72**)

✔

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands