manualshive.com logo in svg

Panasonic KX-TD816AL, User Manual

Share
Download
Panasonic KX-TD816AL User Manual Download Page 259

5.2

SLT Features

P

SLT Features

     

5-51

Paging — All

Allows you to make a voice announcement to all extensions. Your message is announced
over the built-in speakers of the proprietary telephones (PT) and external pagers.

1. Lift the handset.

2. Dial the feature number (62 or 63) and 

.

• You hear confirmation tone (optional).

3. Make the announcement.

4. Wait for an answer and talk.

Paging — External

Allows you to make a voice announcement over external pagers.

To access all external pagers

1. lift the handset.

2. Dial the feature number (62) and 0.

• You hear confirmation tone (optional).

3. Make the announcement.

1

2

or

3

4

1

2

3

With 

Compliments 

Absolute 

Phone 

& 

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands