Panasonic KX-NS300, User Manual

Page: 342 / 388

Message Client
Item Description
Message Client Display
Language Specifies the language of information generated by the UM system for the
mail (IMAP) client.
Changing E-mail Notification Settings
You can set the e-mail notification settings for missed calls in the Email Notification tab of the Edit User
screen. If Enable is selected, you will receive an e-mail at the address(es) specified in Email 1–3 in the
Contact tab when an outside call is missed (refer to "Changing Your Contact Information" in "3.2.1 User
Programming").
1. In the Email Notification tab, select Enable or
Disable for Email notification for missed call .
2. Click OK .
Changing Forward/Do Not Disturb Setting
You can change your extension’s Forward/Do Not Disturb settings for outside and intercom calls in the
Telephony Feature tab of the Edit User screen.
1. In the Telephony Feature tab, set Forward/Do Not
Disturb as follows:
•
For Outside Calls :
To specify the forward type, select the desired type
from the
For external calls drop-down list, then
enter the telephone number or select Phone
(Home)
*1
or Phone (Mobile)
*1
to specify the forward
destination.
•
For Intercom Calls :
To specify the forward type, select the desired type
from the
For internal calls drop-down list, then
enter the telephone number or select Phone
(Home)
*1
or Phone (Mobile)
*1
to specify the forward
destination.
*1 These phone numbers are set in the Contact tab of the Edit
User screen.
Note
To apply settings to both outside and intercom calls,
click
For both internal calls and external calls .
When you select this, the setting of For external
calls is applied to both outside and intercom calls.
2. Click OK .
Storing names and numbers in personal speed dialling
You can set frequently dialled numbers using two-digit speed dialling numbers (00–99). A maximum of 100
Personal Speed Dialling numbers can be programmed at your extension for your personal use.
1. In the Telephony Feature tab, click Speed Dialling
View/Edit .
342 User Manual
3.2.1 User Programming