Panasonic KX-NS300, User Manual

Page: 296 / 388

–
Telephone numbers 1 and 2 used for call forwarding destinations when Remote Call Forwarding is set to
an outside line
•
If the Unified Messaging system is being programmed via Web Maintenance Console, the
Message Manager cannot customise his or her mailbox. The system will announce, "Sorry,
this function is not available".
•
Message Manager’s Password:
The Message Manager must enter the Message Manager password in order to log in before performing
any Message Manager tasks. In order to ensure system security, we recommend selecting a long (max.
16 digits) password that cannot be easily guessed.
•
Operator’s Extensions:
When callers require help, they can dial the operator call number to be transferred to an operator. A
maximum of 3 operators can be programmed for each time mode; these operators are not necessarily the
same as the operator extensions programmed for the PBX. The extension assigned as Operator 1 for the
day mode is designated as the Message Manager.
•
Telephone Numbers 1 and 2 for Remote Call Forward to Outside:
After programming/changing the telephone numbers used for Remote Call Forward to Outside, the
Message Manager must reset the remote call forwarding setting (refer to "
Remote Call Forwarding
Set"), even if it was already enabled. Telephone numbers set here will not be effective until remote call
forwarding is reset. If you do not reset remote call forwarding, calls will be forwarded to the old telephone
numbers.
296 User Manual
2.2.2 Message Manager Features