background image

1.9.12  Using Your PS or S-PS in Parallel with a Wired Telephone
(Wireless XDP Parallel Mode)

Your PS or S-PS can be used in parallel with a PT, SLT, or SIP phone.
When in this mode, incoming calls to a wired telephone also ring the paired PS or S-PS.

To set

Enter 

extension number

of the paired telephone. 

Press 

CANCEL

.

PS/S-PS

extension no.

Press 

TALK

.

Enter     

48

.

4

8

1

C.Tone

Enter 

1

.

To cancel

PS

PS/S-PS

Press 

CANCEL

.

Press 

TALK

.

Enter     

48

.

4

8

0

C.Tone

Enter 

0

.

Some wired telephones are prohibited from using this feature.

If you go off-hook while your parallelled telephone is in use,

 the call will switch over to

you (except SIP phones and S-PSs).

User Manual

211

1.9.12 Using Your PS or S-PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)

Summary of Contents for KX-NS300





































































































































































































































































































































































































Reviews: