Panasonic KX-NS300, User Manual

Page: 149 / 388

system features quickly. While guidance is being provided, you can also use service commands to, for example,
switch to a different Unified Messaging system service mode.
*1 For KX-UT series SIP phone and S-PS users: When using the MESSAGE button, please press the MESSAGE button before going
off-hook.
# 1
Dialling by Name
# 2
Custom Service
You will be guided to enter a Custom Service number (1–200).
# 5
Log in
*1
# 6
Voice Mail Service
You can record a message for another subscriber by entering his or her mailbox
number when guided. You can also log in to your mailbox by entering this command
followed by and your mailbox number.
# 7
Restart (Return to Main Menu)
*2
# 8
Automated Attendant Service
# 9
Exit
Return to Previous Menu
0
Help
# #
Switch Service mode
If you are authorised to access a System Manager and/or Message Manager
mailbox by the System Administrator, you can switch between those services as
follows:
Subscriber service Message Manager service System Manager service
*1 If pressed while in Subscriber Service, you will be prompted to enter the desired mailbox number.
*2 If pressed while in Subscriber Service, you will return to the Subscriber Service Main Menu.
•
Commands #5 and #7 are available only after you have accessed Subscriber Service.
•
Some commands may not be available depending on the COS settings of your mailbox.
When Using Voice Prompts
The following commands can be used to help you navigate through Unified Messaging system menus.
Takes you back to the previous menu.
0
Repeats the current menu.
# 7
Takes you back to the Main Menu.
User Manual 149
1.8.2 Logging in to and Configuring Your Mailbox