Omron R6YXC1000, User Manual, Page: 230 / 260

A
Troubleshooting
A-48
14.233 : Parameter error
Code : &H000E &H00E9
Meaning/Cause The parameter exceeded the range that can be input.
Action Set the parameters within the range.
14.400: Communicate disconnected
Code : &H000E &H0190
Meaning/Cause
a. Error occurred on the external communication.
b. Overrun error or framing error occurred.
c. External device power was turned on/off with connecting to the external device by the
communication cable.
Action
• Prevent putting noise generation source close to the robot so as to improve the communication
environment.
• Check the connection of the communication cable.
• Replace the communication cable.
• Check the communication parameter settings.
14.441: EtherNet link error
Code : &H000C &H01B9
Meaning/Cause Error occurred on the EtherNet/IP option board.
Action Contact your distributor.
14.500: Data send error
Code : &H000E &H0190
Meaning/Cause Error occurred on the external communication by RS-232C during sending.
Action Check the communication parameter settings.
14.501: Data receive error
Code : &H000E &H01F5
Meaning/Cause Error occurred on the external communication by RS-232C during receiving.
Action Check the communication parameter settings.
14.502: Framing error
Code : &H000E &H01F6
Meaning/Cause Error occurred on the external communication by RS-232C.
Action Check the communication parameter settings.
14.503: Parity error
Code : &H000E &H01F7
Meaning/Cause Error occurred on the external communication by RS-232C.
Action Check the communication parameter settings.
14.504: Over run error
Code : &H000E &H01F8
Meaning/Cause Error occurred on the external communication by RS-232C.
Action Check the communication parameter settings.