Omron R6YXC1000, User Manual, Page: 227 / 260

A
Troubleshooting
A-45
12.751: PIO STD. board connector error
Code : &H000C &H02EF
Meaning/Cause
a. The standard PIO board cable is not connected.
b. The standard PIO board connector is half-plugged.
c. The standard PIO board wiring is incorrect.
Action
a. Connect the standard PIO board cable.
b. Re-insert the standard PIO board connector.
c. Check the wiring of the standard PIO board.
12.761: DeviceNet initialize error
Code : &H000C &H02F9
Meaning/Cause Initializing the DeviceNet option board failed.
Action Contact your distributor.
12.762: EtherNet/IP initialize error
Code : &H000C &H02FA
Meaning/Cause Initializing the EtherNet/IP option board failed
Action Contact your distributor.
12.763: EtherNet/IP parameter mismatch
Code : &H000C &H02FB
Meaning/Cause Parameters set in the controller do not correspond to those set in the option board.
Action Initialize the EtherNet/IP option parameters.
12.764: PROFIBUS initialize error
Code : &H000C &H02FC
Meaning/Cause Initializing the PROFIBUS option board failed.
Action Contact your distributor.
12.765: PROFINET initialize error
Code : &H000C &H02FD
Meaning/Cause Initializing the PROFINET option board failed.
Action Contact your distributor.
12.900: Incorrect option setting
Code : &H000C &H0384
Meaning/Cause
a. Error occurred in ID setting on the option module.
b. Option modules that cannot be mixed were installed.
c. The installed option module cannot be identified.
Action
a. Check the ID setting of the option module.
b. Install the correct option modules.
c. Replace the option module.
• Replace the controller.