Omron R6YXC1000, User Manual, Page: 199 / 260

A
Troubleshooting
A-17
5.203 : Number error
Code : &H0005 &H00CB
Meaning/Cause
a. The input number is incorrect.
b. The input expression value is incorrect.
Action
a. Input a correct number.
b. Input a correct expression value.
5.204 : Bit number error
Code : &H0005 &H00CC
Meaning/Cause The specified bit number is not within 0 to 7.
Action Specify a correct bit number.
5.206 : Digit number error
Code : &H0005 &H00CE
Meaning/Cause
a. Binary number has exceeded 8 digits (places).
b. Octal number has exceeded 6 digits (places).
c. Decimal number has exceeded the specified range.
d. Hexadecimal number has exceeded 8 digits (places).
e. Cartesian coordinate point data has more than 3 decimal places.
Action
• Change to the correct number of digits (places).
• Specify the Cartesian coordinate point data of up to 3 decimal places.
5.207 : Illegal axis name
Code : &H0005 &H00CF
Meaning/Cause The input robot axis name is incorrect.
Action Input a correct axis name.
5.208 : Illegal order
Code : &H0005 &H00D0
Meaning/Cause The bit order specified for I/O port is incorrect.
Action Input in descending order starting from left.
5.212 : Stack overflow
Code : &H0005 &H00D4
Meaning/Cause The stack area for execution overflowed.
Action
• Shorten the expression (for example, by dividing).
• Reduce nesting of "GOSUB", "CALL" and "FOR to NEXT" statement.
• Reduce argument of "CALL" statement.
5.213 : Illegal variable
Code : &H0005 &H00D5
Meaning/Cause A variable other than a global variable was used in "SEND/@READ/@WRITE" commands.
Action Input a global variable.
5.214 : Type mismatch
Code : &H0005 &H00D6
Meaning/Cause
a. Expression types are not equal on both sides.
b. An incorrect type constant/variable/expression is used.
Action
a. Use the same expression type on both sides.
b. Use a correct type constant/variable/expression.