3.4 Main Circuit Wiring
34
3.4.3 Wiring Connector for the Servomotor Main Circuit Cable (CNB)
Wire the connector for the servomotor main circuit cable (CNB) in the same way as the connector for
the power supply/regenerative unit (CNA). Refer to
3.4.2 Wiring Connector for the Power Supply/
Regenerative Unit (CNA)
for details and the procedure.
• The distance between the servomotor main circuit and the encoder cable as well as the I/
O cable and MECHATROLINK-
II
cable is 300 mm or more.
• Do not bundle or run the servomotor main circuit cable in the same duct with other cables.
• Be sure that the maximum wiring length of the servomotor main circuit cable is 20 m.
Controller
Separate by 300 mm or more
Power Supply
IMPORTANT
TOEP_C710806_03A_1_0.book Seite 34 Montag, 2. Juli 2007 3:55 15
