H3DR-A/P/M
H3DR-A/P/M
71
No-input Models
Item
H3DR-M
Accuracy of operating
time
!
2% FS max.
Setting error
!
10% FS
!
0.05 s max.
Reset time
Min. power-opening time: 0.1 s
Reset voltage
10% max. of rated supply voltage
(10 V max. for 100 to 240 VAC, 100 to 120 VAC;
20 V max. for 200 to 240 VAC)
Influence of voltage
!
2% FS max.
Influence of temperature
!
5% FS max.
Insulation resistance
100 M
$
min. (at 500 VDC)
Dielectric strength
2,000 VAC, 50/60 Hz for 1 min (between current-carrying terminal and non-current-carrying metal parts)
2,000 VAC, 50/60 Hz for 1 min (between control output terminals and operating circuit)
1,000 VAC, 50/60 Hz for 1 min (between contacts not located next to each other)
Impulse withstand voltage
3 kV (between power terminals) for 100 to 120 VAC, 110 to 120 VAC, 200 to 240 VAC, 220 to 240 VAC,
100 to 240 VAC, 1 kV for 12 VDC, 24 VDC/VAC
4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) for 100 to
120 VAC, 110 to 120 VAC, 200 to 240 VAC, 220 to 240 VAC, 100 to 240 VAC, 1.5 kV for 12 VDC,
24 VDC/VAC
Noise immunity
!
1.5 kV (between power terminals) and
!
600 V (between input terminals), square-wave noise by noise
simulator (pulse width: 100 ns/1
&
s, 1-ns rise)
Static immunity
Malfunction: 4 kV
Destruction: 8 kV
Vibration resistance
Destruction:10 to 55 Hz with 0.75-mm double amplitude each in three directions
Malfunction:10 to 55 Hz with 0.5-mm double amplitude each in three directions
Shock resistance
Destruction: 980 m/s
2
(100G) each in three directions
Malfunction: 98 m/s
2
(10G) each in three directions
Life expectancy
Mechanical:20 million operations min. (under no load at 1,800 operations/h)
Electrical:
100,000 operations min. (5 A at 250 VAC, resistive load at 1,800 operations/h)
Enclosure rating
IEC: IP40
Weight
Approx. 120 g
Note:
The reset voltage is the residual voltage allowed from the power supply when returning the Timer to the status that existed prior to
operation.
Engineering Data
Load current (A)
30 VDC L/R = 7 ms
250 VAC/30 VDC
(cos
%
= 1)
250 VAC (cos
%
= 0.4)
S
w
it
c
h
in
g
operat
ions
(x
10
)
3
Reference: A maximum current of 0.15 A can be switched at 125 VDC (cos
%
= 1).
Maximum current of 0.1 A can be switched if L/R is 7 ms. In both cases,
a life of 100,000 operations can be expected.
The minimum applicable load is 10 mA at 5 VDC (failure level: P).
10,000
5,000
1,000
500
100