H3CR-A
H3CR-A
17
Mounting Track
50 cm (
l
) x 7.3 mm (t)
PFP-50N
1 m (
l
) x 7.3 mm (t)
PFP-100N
1 m (
l
) x 16 mm (t)
PFP-100N2
End Plate
PFP-M
Spacer
PFP-S
Protective Cover
Y92A-48B
Time Setting Ring
Setting a specific time
Y92S-27
Limiting the Setting Range
Y92S-28
Panel Cover
Color (Munsell No.)
Model
Light Gray (5Y7/1)
Y92P-48GL
Black (N1.5)
Y92P-48GB
Medium Gray (5Y5/1)
Y92P-48GM
Note:
The Time Setting Ring and Panel Cover are sold together.
Hold-down Clip
Specification
Model
For PL08 and PL11 Sockets
Y92H-7 (not for H3CR-A8EL)
Y92H-1 (for only H3CR-A8EL)
For PF085A Socket
Y92H-8 (not for H3CR-A8EL)
Y92H-2 (for only H3CR-A8EL)
Specifications
General
Item
H3CR-A/-AS
H3CR-A8/-A8S
H3CR-A8EL/-A8E
Operating mode
A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
A: ON-delay
E: Interval
Pin type
11-pin
8-pin
Input type
No-voltage input
---
Time-limit output type
H3CR-A/-A8:
Relay output (DPDT)
H3CR-AS/-A8S: Transistor output (NPN/PNP)*
Relay output (SPDT)
Instantaneous output type
---
Relay output (SPDT)
Mounting method
DIN track mounting, surface mounting, and flush mounting
EMC
Emission Enclosure:
EN55011 Group 1 class A
Emission AC Mains:
EN55011 Group 1 class A
Immunity ESD:
IEC801-2:
4 kV contact discharge (level 2)
8 kV air discharge (level 3)
Immunity RF-interference:
ENV50140: 10 V/m (80 MHz to 1 GHz) (level 3)
Immunity Conducted Disturbance: ENV50141: 10 V (0.15 to 80 MHz) (level 3)
Immunity Burst:
IEC801-4:
2 kV power-line (level 3)
2 kV I/O signal-line (level 4)
Approved standards
UL508, CSA C22.2 No.14, LR/NK
Conforms to VDE0435/2021, VDE0110
Conforms to EN50081-2, prEN50082-2
*The internal circuits are optically isolated from the output. This enables application of either NPN or PNP transistors.
Time Ranges
Time unit
s (sec)
min
h (hrs)
x10 h (10 h)
Setting
0
Instantaneous output (To obtain instantaneous output, set to below 0.) (see note)
1.2
0.05 to 1.2
0.12 to 1.2
1.2 to 12
3
0.3 to 3
3 to 30
12
1.2 to 12
12 to 120
30
3 to 30
30 to 300
Note:
Instantaneous output is available with all H3CR-A models.