H3CR-F
H3CR-F
38
Accessories (Order Separately)
Name/specifications
Models
Flush Mounting Adapter
Y92F-30
g
p
Y92F-73
Y92F-74
Mounting Track
50 cm (
l
) x 7.3 mm (t)
PFP-50N
1 m (
l
) x 7.3 mm (t)
PFP-100N
1 m (
l
) x 16 mm (t)
PFP-100N2
End Plate
PFP-M
Spacer
PFP-S
Protective Cover
Y92A-48B
Track Mounting/
F
t C
ti
S
k t
8-pin
P2CF-08
g/
Front Connecting Socket
11-pin
P2CF-11
Back Connecting Socket
8-pin
P3G-08
g
11-pin
P3GA-11
Hold-down Clip
For PL08 and PL11 Sockets
Y92H-7
For PF085A Socket
Y92H-8
Specifications
General
Item
H3CR-F
H3CR-F8
H3CR-FN
H3CR-F8N
Operating mode
Flicker OFF start
Flicker ON start
Pin type
11-pin
8-pin
11-pin
8-pin
Operating/Reset method
Time-limit operation/Time-limit reset or self-reset
Output type
Relay output (DPDT)
Mounting method
DIN track mounting, surface mounting, and flush mounting
EMC
Emission Enclosure:
EN55011 Group 1 class A
Emission AC Mains:
EN55011 Group 1 class A
Immunity ESD:
IEC801-2:
4 kV contact discharge (level 2)
8 kV air discharge (level 3)
Immunity RF-interference:
ENV50140: 10 V/m (80 MHz to 1 GHz) (level 3)
Immunity Conducted Disturbance: ENV50141: 10 V (0.15 to 80 MHz) (level 3)
Immunity Burst:
IEC801-4:
2 kV power-line (level 3)
2 kV I/O signal-line (level 4)
Approved standards
UL508, CSA C22.2 No.14, LR/NK
Conforms to VDE0435/2021, VDE0110
Conforms to EN50081-2, prEN50082-2
Time Ranges
0.05 s to 30 h Models
Time unit
s (sec)
x10 s (10 s)
min
h (hrs)
Setting
1.2
0.05 to 1.2
1.2 to 12
0.12 to 1.2
3
0.3 to 3
3 to 30
0.3 to 3
12
1.2 to 12
12 to 120
1.2 to 12
30
3 to 30
30 to 300
3 to 30
Note:
Instantaneous output is available at any time range. To obtain instantaneous output, set to below 0.
1.2 s to 300 h Models
Time unit
x10 s (10 s)
x10 min (10 min)
h (hrs)
x10 h (10 h)
Setting
1.2
1.2 to 12
1.2 to 12
0.12 to 1.2
1.2 to 12
3
3 to 30
3 to 30
0.3 to 3
3 to 30
12
12 to 120
12 to 120
1.2 to 12
12 to 120
30
30 to 300
30 to 300
3 to 30
30 to 300
Note:
Instantaneous output is available at any time range. To obtain instantaneous output, set to below 0.