270
24-hour Time Switch
H2E
ON/OFF Operation in Units of
15 Minutes
The only requirement for time setting is the
plugging of a setting pin into the desired hole on the
dial.
Permits manual ON/OFF operation independent of
the set time.
A power indicator lamp is provided, which permits
monitoring even during the night.
Ordering Information
Classification
Control output
One cycle time
Min. setting time
Mounting method
Model
Standard type
SPST-NO
24 hrs
15 min
Surface mounting
H2E
Flush mounting
H2E-Y
Dual-circuit type
DPST-NO
30 min
Surface mounting
H2E-2
Flush mounting
H2E-Y2
Note:
1. Specify both the model number and supply voltage when ordering. All H2E-series Timers are supplied with two pairs of setting pins
(one pair for each ON operation and OFF operation) as the standard accessories. If more setting pins are required, also specify the
required number of setting pins.
2. For the flush mounting types, a mounting bracket is supplied.
3. Repetitive operations can be performed in a cycle of 24 hrs.
Specifications
Time Ranges
Item
H2E, H2E-Y
H2E-2, H2E-Y2
Type
Daily
Operation period
24-hour
Minimum division
15 min
Minimum set time
15 min
30 min
Maximum set time
23 hrs 45 min
24 hrs
Ratings
Rated supply voltage
100/110 or 200/220 VAC (50/60 Hz)
Operating voltage range
85% to 110% of rated supply voltage
Power consumption
Approx. 2 VA
Control outputs
15 A at 250 VAC, resistive load (cos
%
= 1) (max. operating voltage: 250 VAC)