H5AN
H5AN
192
Operation
Timing Chart
Digital Display
UP Display
DOWN Display
(See note)
(See note)
(See note)
(See note)
Note:
After the set time has elapsed, operation continues according to the mode (N, F, C, R, K, P, or Q).
Operation Mode
(The control output and digital display when the set time is up differ in each of the operation modes available.)
Mode
UP display
DOWN display
Operation after the set time is
up
N
The control output and digital
display are held until a reset input
is applied.
F
In UP mode, the digital display
continues to increment up to
“9999” even after reaching the set
value and then returns to all
zeroes. In DOWN mode, the
digital display continues to up
9999, and then decrements “9998,
9997, ...,” after reaching all
zeroes. The control output is held
until a reset input is applied.
C
The digital display returns to the
initial setting once the set time has
elapsed and the timer restarts the
timing operation.
When the set time has elapsed,
the output signal is generated
during the one-shot time. The
timer repeats this cycle.
R
The digital display returns to the
initial setting after the one-shot
time and the timer restarts the
timing operation. When the set
time has elapsed, the output
signal is generated during the
one-shot time. The timer repeats
this cycle.