H3DR-A/P/M
H3DR-A/P/M
67
Accessories (Order Separately)
Mounting Track
50 cm (
l
) x 7.3 mm (t)
PFP-50N
1 m (
l
) x 7.3 mm (t)
PFP-100N
1 m (
l
) x 16 mm (t)
PFP-100N2
End Plate
PFP-M
Spacer
PFP-S
Specifications
General
Item
H3DR-A/-AS
H3DR-AP/-ASP
H3DR-P
H3DR-PP
H3DR-M
Operating mode
A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
ON-delay
Terminal block
11/12 terminal
6/12 terminal
5/12 terminal
Input type
No-voltage input
(NPN Model)
Voltage input
(PNP Model)
No-voltage input
(NPN Model)
Voltage input
(PNP Model)
---
Output type
H3DR-A:
Relay output (DPDT);
H3DR-AS: Transistor output
(NPN/PNP) (see note)
Relay output (SPDT)
Mounting method
DIN track mounting
EMC
Emission Enclosure:
EN55011 Group 1 class A
Emission AC Mains:
EN55011 Group 1 class A
Immunity ESD:
IEC801-2:
4 kV contact discharge (level 2)
8 kV air discharge (level 3)
Immunity RF-interference:
ENV50140: 10 V/m (80 MHz to 1 GHz) (level 3)
Immunity Conducted Disturbance: ENV50141: 10 V (0.15 to 80 MHz) (level 3)
Immunity Burst:
IEC801-4:
2 kV power-line (level 3)
2 kV I/O signal-line (level 4)
Approved standards
UL508, CSA C22.2 No.14
Conforms to VDE 0435/2021 C/250, C/30 (-AS model), VDE 0110, VDE0106/P100,
IEC947 AC-15 (-P
j
and -M models), AC-13 (-A
j
model), DC-13 (-AS
j
model)
Conforms to EN50081-2, prEN50082-2
Note:
The internal circuits are optically isolated from the output. This enables application of either NPN or PNP transistors.
Time Ranges
H3DR-A
j
/-AS
j
/-P
j
Time unit
s (sec)
min
h (hrs)
x10 h (10 h)
Setting
0
Instantaneous output (see note)
Time scale: x 0.1
0.1 to 1.2
1 to 12
Time scale: x 1
1 to 12
10 to 120
Note:
To obtain instantaneous output, set the value below zero.
H3DR-M Single-time Range
Rated time
Time range
1 s
0.1 to 1 s
5 s
0.2 to 5 s
10 s
0.5 to 10 s
30 s
1 to 30 s
60 s
2 to 60 s
10 min
0.5 to 10 min