66
RECEPTION
4.
Press START .
The current value for the selected parameter will
appear on the display.
5.
Press SET/CONF . to confirm the value selected or:
press
∨∨
or
∧
∧
to select the alternative condition and
then press SET/CONF . to confirm it.
6.
Press STOP twice to quit the menu and return to
stand-by.
A U T O M A T I C R X
Y E S
MANUAL RECEPTION
You must take action when an incoming call is received if the facsimile machine has been set for manual
reception. This method is probably most convenient when you are in the office as it enables you to use the
telephone line both for telephone and facsimile calls. When the telephone rings, as soon as you lift the
handset, you will realize if it is a voice call or if you have to activate the facsimile machine to receive a
document.
o
The facsimile machine is on. The message “MANUAL RX” appears on the second line of the display.
1.
When the telephone rings, lift the handset.
If you hear someone’s voice, talk as normal.
If you hear an intermittent tone, this means that the caller wants to send you a document via fax.
2.
Press START.
The message “IN RX” appears on the first line and the correspondent’s number appears on the second
line of the display.
3.
Lower the handset.
If the handset has been left off the hook, the facsimile machine beeps and the message “HANDSET OFF
HOOK” appears on the display. Hang up.
4.
Once reception has been completed, the facsimile machine beeps and returns to stand-by mode.
If the “LAST RX REPORT” parameter has been enabled in the operating configuration, the facsimile
machine will print the report at the end of reception.
If the machine beeps and the error LED comes on during reception, this means that an error has occurred
(e.g. an interruption in the connection). If this is the case, press STOP to switch off the LED and call the
correspondent to ask him to send the document again.
cap10.p65
13/04/00, 22.33
66
