32
PROGRAMMING
2.
Press START to access the menu.
3.
Press the
∨∨
key once to select the “Sender’s name”
function.
4.
Press START to start storing the name, e.g. P.I.S.A.
S.p.A..
Each character is entered by pressing the
∨∨
or
∧∧
key
to scroll through the entire set of alphanumeric
characters until the desired character is displayed and
then by pressing the > key to confirm selection. The
character to be selected appears in the top right-hand
corner. (For a complete list of the alphaumeric
characters available, refer to the “CHARACTER SET
TABLE” chapter).
If you make a typing error, delete the entire setting by
pressing CLEAR.
5.
To confirm the name set, press SET/CONF.
Having stored the sender’s name, the facsimile is
automatically set for programming the next function.
Move straight on to step 4 of the “SETTING
PASSWORDS” section, if you want to continue
programming the remaining functions on the menu, or:
press STOP twice to quit the menu.
D A T A E N T R Y
D A T E / T I M E
D A T A E N T R Y
S E N D E R ’ S N A M E
S E N D E R ’ S N A M E
A
S E N D E R ’ S N A M E
.
P . I . S. A . S . p . A .
D A T A E N T R Y
T X P A S S W O R D
cap06.p65
13/04/00, 22.20
32
