21
PROGRAMMING
If the facsimile machine is connected to an exchange
and the user is an external user, press EXT./PAUSE
before entering the number. In this case the display
shows the letter “E” before the numeric sequence.
8.
Press SET/CONF. to confirm the number set.
At this point, as the remaining parameters are optio-
nal, you can quit the menu by pressing STOP twice.
The facsimile returns to stand-by mode.
9.
Enter the correspondent’s name - max. 30
alphanumeric characters - e.g. Clare.
Each character is entered by pressing the
∨∨
or
∧∧
key
to scroll through the entire set of alphanumeric
characters until the desired character is displayed
and then by pressing the > key to confirm selection.
The character to be selected appears in the top right-
hand corner. (For a complete list of the alphaumeric
characters available, refer to the “CHARACTER SET
TABLE” chapter).
To delete an entire setting, press CLEAR and repeat
the entry procedure.
10. Press SET/CONF. to confirm the name entered.
11. Enter the relevant telephone number - max. 32 digits
- on the numeric keypad, e.g. 0125 230025.
If the display shows a previously set number, you can
confirm it by pressing SET/CONF. , or replace it with
a new number by typing the new number on the
numeric keypad and pressing SET/CONF.
To delete a setting, press CLEAR .
+
E N T E R
N A M E A
E N T E R
N A M E e
C l a r e
E N T E R
T E L . N O .
6 :
E N T E R
T E L . N O .
0 1 2 5 2 3 0 0 2 5
cap05.p65
13/04/00, 22.17
21
