Olivetti DP, Technical Information Manual

Page: 83 / 180

Windows Troubleshooting
Chapter 4: Windows Peer-to-Peer Network Setup
❖
4-33
25
Click YES if you wish all AppleTalk printing to go through this
queue.
26
Click NO if you wish all AppleTalk clients to print directly to the
printer.
27
You will be returned to the Create Printer window.
28
If you wish to share the printer with other users on the network,
click once on the check box for Share this printer on the network. If
not, go to the next step.
29
Select OK to close this window and click OK again to exit Create
Printer window.
30
You can now print to the DP printer. If you shared it, your NT
clients can now print as well.
31
Send a print job to the printer.
32
Check the print job for print quality. If print quality problems exist,
use Chapter 6 of the DP System Administrator Guide to correct the
problem.
33
If your print job did not print, see the Troubleshooting section for
your operating system in this chapter to correct the problem.
Windows NT 4.0
Troubleshooting (TCP/
IP)
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in Chapter 2: Connecting to Your Network.
• You have loaded a DP PCL or PostScript print driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1 Verify these items in the Ethernet Menu area of the Configuration
Sheet:
• IP Address Resolution: is set to DHCP, Control Panel, or RARP/
BOOTP (depending on your network configuration).
• Current IP Address: is set correctly (note this address if it is
assigned dynamically).
• Subnet Mask: is set correctly (if used).