Olivetti DP, Technical Information Manual

Page: 23 / 180

Set An IP Address
Chapter 2: Connecting to Your Network
❖
2-7
Dynamic Addressing
(DHCP)
The TCP/IP address is assigned automatically by the Server.
1
Power the printer ON and allow time for an IP address to be
assigned by the DHCP server (this time may vary depending on
network traffic).
2
Perform the steps contained in the section “Print the Configuration
Sheet” (page 2-11).
3
Obtain the hardware and TCP/IP addresses from the Configuration
Sheet.
4
Update the lease time, if necessary, depending on your printer usage
patterns.
If your network is using this protocol to assign TCP/IP addresses,
be aware that the lease on the assigned address can run out if your
printer is taken off the network for longer than the allocated lease
time.