Olivetti DP, Technical Information Manual

Page: 26 / 180

Setting DEFAULT GATEWAY at the Control Panel
2-10
❖
DP Technical Information Guide
Setting DEFAULT
GATEWAY at the
Control Panel
1
Press Menu Up or Menu Down until you see:
M e n u s
E t h e r n e t M e n u
2 Press Item Up or Item Down until you see:
E t h e r n e t M e n u
D e f a u l t G a t e w a y
3
Press Value Up or Value Down. You will see:
D e f a u l t G a t e w a y =
x x x . x x x . x x x . x x x
4 Press Value Up or Value Down to change the value of the character
above the cursor. The value is incremented or decremented by 1
each time the key is pressed. Holding down Value Up or Value
Down causes continuous scrolling through the values.
5 To change other characters in the Default Gateway address, press
Item Up or Item Down to scroll right or left respectively through
the character string, then press Value Up or Value Down to change
the value of the character above the cursor (as in Step 4).
6
When you have completed setting the Default Gateway address,
press Enter. You will see:
E t h e r n e t M e n u
D e f a u l t G a t e w a y
7
Press On Line. You will see:
R e a d y