Olivetti DP, Technical Information Manual

Page: 56 / 180

Software Installation
4-6
❖
DP Technical Information Guide
6
After a few moments, the Install Shield Wizard will load. A new
dialog screen with installation options will appear. Select from one
of these options:
• Typical Installation
Choosing this mode will automatically copy all necessary
software to your hard disk in a predetermined directory.
• Custom Installation
Choosing this mode will give you control over which files are
copied to your hard drive and where they are placed.
• Disk Image Copy
Choosing this mode gives you the ability to copy the appropriate
CD files to a local or network drive. This mode is recommended
to install the DP drivers and CentreWare DP software to multiple
stations on a network.
7 Once you have selected your installation mode click Next>.
8
From the Select Printer screen, choose the type of printer you are
installing then click Next>.
9
Follow the prompts (these will vary depending on the Install Mode
selected). Be sure to provide the correct disks when requested.
10
When prompted, remove all disks. For network printing,
CentreWare DP will perform all fileserver and queue setup.
Details on Centreware DP are available in Chapter 8: CentreWare
DP 1.1 Software Instructions.