Olivetti DP, Technical Information Manual

Page: 75 / 180

Windows Troubleshooting
Chapter 4: Windows Peer-to-Peer Network Setup
❖
4-25
Setting the Primary Server is extremely important on large
networks.
7 If the above quick checks fail to fix the Network Print problem,
Contact Customer Service.
Windows 95
Troubleshooting
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in Chapter 2: Connecting to Your Network.
• You have loaded a DP PCL or PostScript print driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1
Verify this item in the Ethernet Menu area of the Configuration
Sheet:
• NetBEUI Enable is set to On.
2
Verify that the NetBEUI PDL is properly set depending on your
driver.
3
From a workstation desktop use the right mouse button and select
Network Neighborhood then with the left mouse button select
Properties from the cascade menu.
4 The Network dialog will appear. Select the Configuration tab.
5
Check the list of installed network components for the following
items:
• Peer to Peer
• Client for Microsoft networks
• NetBEUI
6 If you have elected to run CentreWare DP, make sure of the
following:
• Novell Networks:
You are required to load Novell IntraNetWare Client or Client
for IPX printer discovery.
• TCP/IP Networks:
No additional software is required but your printer must have a
valid TCP/IP address assigned.