Olivetti DP, Technical Information Manual

Page: 81 / 180

Windows Troubleshooting
Chapter 4: Windows Peer-to-Peer Network Setup
❖
4-31
Windows NT 3.5X
Troubleshooting
(AppleTalk Protocol)
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in Chapter 2: Connecting to Your Network.
• You have loaded a DP PCL or PostScript print driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1
Open the Control Panel and double-click the Network icon.
2 Verify that “AppleTalk Protocol” or “Services for Macintosh“ are
loaded.
3 If this software is not present, install it using the documentation
provided by Microsoft. Then return to this document.
4 Note the DP Printer Name and Zone by printing the Configuration
Sheet.
5 Printer Name can be found in the upper left corner of the
Configuration Sheet.
6 Zone can be found in the upper left corner of the Configuration
Sheet under EtherTalk Zone. The default for EtherTalk Zone is *.
(*=ALL)
7
Double-click the Printers icon. The Windows NT Print Manager
window appears.
8
Create a new printer in the Print Manager window. To do this, click
once on the Printer entry on the menu bar at the top of the window.
A pull-down menu appears.
9 Use the mouse to select the Create Printer entry and release the
mouse button. The Create Printer dialog box will open.
10 From the Create Printer dialog box name the printer.
11
Name the printer queue by entering a name in the Printer Name
field.